I GOT A NEW TRACTOR

Have you recently purchased a new tractor/mower that you would like to use with your Cyclone Rake? Or maybe you've acquired a Cyclone Rake in the 2nd hand market. Congratulations either way.

How the Cyclone Rake connects to your tractor/mower

There are 3 points of connection between the Cyclone Rake and the unit that you are using to tow it. It's critical that you get the right components as tractor configurations vary widely between brands and models and because of this variability, the parts are not always interchangeable. Unfortunately, in this case, one size does not fit all, so please read the info below or contact us if you have any questions.

The 3 points of connection are:

Mower Deck Adapter - This attaches to your tractor/mower deck and directs the debris from the mower deck in the direction of the Cyclone Rake collector unit. Note that because all mower decks are different, it's important to get the proper one so it fits your tractor/mower and does the job well. Also note that the Mower Deck Adapter will need to match the model Cyclone Rake that you have as the output openings between models vary.

Deck Hose - The deck hose runs from your Mower Deck Adapter to your Cyclone Rake engine/blower housing. This hose diameter will correspond with the mode of Cyclone Rake that you are connecting to and the length of that hose will be based on the distance between the mower deck and the Cyclone Rake engine/blower opening.


Hitch - The hitch attaches to the back of your tractor/mower and creates the dual pin connection that will allow you to tow your Cyclone Rake without jackknifing. Like the Mower Deck Adapter, this is specific to the make and model of your tractor/mower.



How do I know what to purchase?

Simply use the drop down menus below and fill in the information for your tractor/mower. Once filled in, we'll show you the proper parts for your particular Cyclone Rake configuration.

Remember, if you are unsure or if your tractor/mower is not listed, please click here to contact us and our Team will make sure you get the right components.


Step 1: Please select the Cyclone Rake model that you will connect to.

Choose previous ordered rakes or choose new rake


Select new rake here

7"" Classic
8"" Commander
8"" Commercial Pro
8"" XL
10"" Z10
Step 2: Please tell us about your tractor/mower.

Tell us about your tractor

SEARCH FOR YOUR TRACTOR.
Please take a moment to read the below instructions before proceeding.

Step 3: Choose your upgrades & accessories
STD PVC Hose
N/A
N/A
N/A
Upgrade URE Hose
N/A
N/A
N/A
MDA
N/A
N/A

Installation Instructions
HITCH
N/A
N/A

Installation Instructions